6
5
Intelligent Temperature-Controlled Heating Film Control Board, Multi-Film Compatible, Triple Protect
Get in touch

The intelligent heating film control board is designed for multi-scenario temperature control needs, supporting full compatibility with carbon fiber/PTC/metal films. It integrates a PID algorithm and ±0.5°C high-precision temperature control, with triple protections against overvoltage/overcurrent/short circuits, IP68 waterproof and anti-vibration capabilities, and adapts to wide voltage inputs of 12-24V and high-power loads of 2000W. Built-in Bluetooth/WiFi IoT interfaces enable remote programming of multi-segment temperature control curves, meeting strict requirements for new energy vehicle battery preheating, industrial equipment constant temperature, and smart home heating. It is certified by CE/FCC and automotive-grade ISO 16750.


Parameter Category Technical Specifications
Input Voltage DC 12-24V / AC 110-240V 50/60Hz
Maximum Output Power 300W / 2000W
Temperature Control Accuracy ±0.5°C / ±1.5°C
Temperature Setting Range Room temperature – 200°C
Response Time ≤3 seconds
Control Interfaces Touch buttons/knob + OLED screen; RS232/Modbus/CAN bus
Communication Protocols MQTT/HTTP ; Bluetooth 5.2 BLE
Protection Rating IP65 / IP68
Dimensions 100mm×70mm×25mm / 150mm×100mm×35mm
Installation Methods DIN rail/screw fixation/magnetic suction
Compliance Certifications CE/ROHS/FCC ; IEC 60335; ISO 16750
Intelligent Temperature Control System
Intelligent Temperature Control System
Multi-Scenario Adaptation Design
Multi-Scenario Adaptation Design
Safety Protection Mechanisms
Safety Protection Mechanisms
Energy Efficiency Optimization Technology
Energy Efficiency Optimization Technology
Interaction and Expandability
Interaction and Expandability

BMS Customization Processes

Requirement Communication
Design & Sample Development
Pilot Run & Validation
Mass Production & Quality Control
Delivery & After-Sales Support

Requirement Communication

（1）Customer Request: Battery specifications, application, communication protocol, functional needs.

（2）Manufacturer Evaluation: Identify whether the demand fits a standard BMS model or requires custom development.

（3）Quotation & Proposal: Provide datasheet, technical solution, lead time, and quotation.

Design & Sample Development

Standard BMS: Recommend existing models, prepare samples for customer testing.

Custom BMS:

（1）Circuit Design.

（2）Firmware Development.

（3）Structure/ID Design 

Sample Testing: Deliver prototypes for customer evaluation 

Pilot Run & Validation

Internal Testing: Functional testing, aging test, and reliability test.

Customer Validation: End-use testing in battery packs/vehicles/equipment.

Iteration: Adjust design based on customer feedback.

Mass Production & Quality Control

Material Preparation: Key components.

Production Process: SMT → DIP → Soldering → Assembly → Testing.

QC Process: 100% functional test, communication test, aging test.

Certification: CE, UL, UN38.3, or others as required by the customer.


Delivery & After-Sales Support

Delivery Timeline:

Small batches: 2–4 weeks

Large batches: 6–8 weeks (depending on component supply chain)

Packaging & Shipping: ESD-safe packaging, support for air or sea shipping.

After-Sales Service:

Technical documentation and software tools

Firmware upgrades

Warranty (typically 12–24 months)

Free Quote
Certifications
FCC
FCC
RoHS
RoHS
CE
CE
ISO 9001
ISO 9001
UN 38.3
UN 38.3
Authentic feedback from customers worldwide about KURUI BMS manufacturers.

MESSAGE

Ready to Power Your Energy Solutions? Let’s Build Together.

When you work with KURUI Battery Management Systems Factory, you gain:

Comprehensive Capabilities: A true one-stop-shop for your BMS needs – from LiFePO4 battery packs for e-bikes, scooters, and golf carts to high-capacity BMS for forklifts and energy storage systems.

A Transparent Process: Clarity and control at every stage – from technical consultation, R&D, prototyping to mass production and global delivery.

A Commitment to Quality & the Future: A partner dedicated to safety, reliability, and sustainability in every BMS we make. We help you comply with international standards and build a stronger product reputation.


We look forward to speaking with you. Let's Have a WhatsApp Chat
WhatsApp
RELATED PRODUCTS
+86-15813874629 +86-15813874629
Products
Application
News
About Us
Contacts
Tel：+86-15813874629
E-Mail：info@kuruibms.com
Address：Building 1, No. 18,Foxin Fumin South Fifth Road, Dalang Town, Dongguan,Guangdong.
Copyright © Dongguan KURUI Electronic Technology Co., LTD
Leave Your Message