LiFePO4 BMS 7S 25.2V 15A for Hoverboard Batteries
This LiFePO4 BMS is suitable for 7S/10S/13S battery packs, supports a 15A discharge current, and is compatible with 24V, 36V, and 48V systems. With built-in overcharge, over-discharge, overcurrent, and short-circuit protection, it ensures battery stability and extends battery life, making it ideal for electric hoverboard applications.
Seamless support for PC software, Bluetooth, and mobile APP monitoring (optional)
Advanced algorithms deliver precise battery state detection for reliable performance
Comprehensive safeguards against over-voltage, over-current, over-discharge, over-temperature, under-voltage, under-temperature, and short circuits
Fully configurable software parameters tailored to your application needs
Optional GPS integration and display screen support for smarter management
Optimized for NCM, LiFePO4, sodium-ion, and other advanced chemistries
| Parameters | Specification |
|---|---|
| Battery Series | 7S、10S、13S |
| Operating Voltage Range | 24V、36V、48V |
| Max Charge/Discharge Current | 15A |
| Charging Method | Same Port |
| Temperature Detection | 4 Channels |
| Balanced Approach | Passive Balancing |
| Self-Discharge | <100uA |
| Operating Current | ≤30mA |
| Size | 134.74*66*15.68（mm） |
| Basic Function | Special Handle Current Integration Power on Wake-up Load Detection |
Processes
Requirement Communication
（1）Customer Request: Battery specifications, application, communication protocol, functional needs.
（2）Manufacturer Evaluation: Identify whether the demand fits a standard BMS model or requires custom development.
（3）Quotation & Proposal: Provide datasheet, technical solution, lead time, and quotation.
Design & Sample Development
Standard BMS: Recommend existing models, prepare samples for customer testing.
Custom BMS:
（1）Circuit Design.
（2）Firmware Development.
（3）Structure/ID Design
Sample Testing: Deliver prototypes for customer evaluation
Pilot Run & Validation
Internal Testing: Functional testing, aging test, and reliability test.
Customer Validation: End-use testing in battery packs/vehicles/equipment.
Iteration: Adjust design based on customer feedback.
Mass Production & Quality Control
Material Preparation: Key components.
Production Process: SMT → DIP → Soldering → Assembly → Testing.
QC Process: 100% functional test, communication test, aging test.
Certification: CE, UL, UN38.3, or others as required by the customer.
Delivery & After-Sales Support
Delivery Timeline:
Small batches: 2–4 weeks
Large batches: 6–8 weeks (depending on component supply chain)
Packaging & Shipping: ESD-safe packaging, support for air or sea shipping.
After-Sales Service:
Technical documentation and software tools
Firmware upgrades
Warranty (typically 12–24 months)
